Freestanding Steel Hockey Goals
Freestanding Steel Hockey Goals
• Uprights and crossbars manufactured from 50mm square x 2.0mm thick steel
• Uprights and crossbars all polyester powder coated white
• Net supports manufactured from 25.4mm diameter x 2.0mm thick steel
• Board support rails for added strength
• Complete with 12 synthetic arrow net hooks per set for attaching the net to the
crossbar
All hockey goals must be anchored correctly to conform to BS EN 750. On synthetic surfaces, suitable provision for anchorage must be made. This can be achieved by installing a ground anchor below the synthetic grass level or by attaching the goal to the nearest perimeter fixing point. If freestanding weights are the only option then 10 x ANC-005 Counterbalance weights are required per goal. See below for anchoring options.
Freestanding Hockey Goals with Wooden Backboards
• Complete with green wooden regulation backboards
• Backboards 460mm x 18mm thick
Recommended net HOC.001
Freestanding Hockey Goals with Practice Backboards
• Complete with white practice backboards
• Backboards 152mm x 25mm thick
Recommended net HOC.001
HP1 Hockey Net
• 2mm thick black polypropylene net
• 3.7m x 2.1m x 1.2m
Flip-over Wheel Kit
• 260mm diameter puncture resistant solid rubber wheels
• Wide wheels allow better weight distribution for easier transportation
• Wheel brackets are designed to be fitted to the welded plate on hockey goal uprights
• Supplied as a set of 4
Hockey Goal Anchor Options - Fence Anchors
• 4 required per set of goals
• Suitable for use on artificial and 3G surfaces
• For attaching to surround fence or use with ANC-020
• Complete with eyebolt, 2 x carbine clips and 3m length of chain
• Extra lengths of chain can be ordered per metre
Hockey Goal Anchor Options - Flip-up Anchor Set
• 4 required per set of goals
• Specifically designed for installation on synthetic pitch areas and tarmac
• Requires installation into a 350mm cube of concrete
• Galvanised steel construction complete with stainless steel top plate and
flip-up anchorage point
• Anti-tamper lid produces a flush fit to the surface for optimum safety
• Complete with allen key to prevent unauthorised access to sand trap
• Anchorage point flips up to enable easy attachment of a carbine clip
• Socket only, use ANC.022 anchor for attachment to goal
Hockey Goal Anchor Options - Counterbalance Weight
• 20 required per set of goals
• 17kg handbag style weight complete with 3 link galvanised chain, carbine clip and
‘U’ type bracket
Hockey Goal Anchor Options - Heavy Duty Turf Anchor
• 4 required per set of goals
• Suitable for use on grass surfaces
• Must be used for hockey goals on very soft ground
• Complete with 3 link galvanised chain, carbine clip and ‘U’ type bracket
