Heavy Duty Pitch Divider System
Heavy Duty Pitch Divider System
Pitch divider systems allow the playing surface to be divided up into sections.
Designed to be installed outside of the perimeter fence and can hang netting with minimal sag over a span of up to 63m.
• 100mm square posts manufactured from 4mm galvanised steel
• Polyester powder coated green, other colours available POA
• Winch post is fitted with a high specification brake winch and top pulley wheel
• Dummy post complete with pulley wheel and cleat
• Winch has enclosed gears for added safety, detachable handle and a maximum load
rating restricted to 100kg
• Available in three out of ground heights - 2.7m, 3.0m or 3.6m
Pitch divider systems must be installed in minimum 1m cube of concrete, consult a structural engineer for advice where required. The posts are designed to be concreted directly in the ground but ground sockets can be supplied separately at an additional cost.
2.7m Professional Pitch Divider System
• Heavy duty winch posts
• 2.7m out of ground post height
3.0m Professional Pitch Divider System
• Heavy duty winch posts
• 3.0m out of ground post height
3.6m Professional Pitch Divider System
• Heavy duty winch posts
• 3.6m out of ground post height
Spare Pitch Divider Socket
• 920mm deep socket with a 103mm square internal face
• Supplied individually
Net Storage Pouch
PVC storage pouch designed to fix to weld-mesh fences. The pouch allows for easy storage of the divider netting protecting it against unnecessary wear and tear when not in use.
• Black PVC pouch complete with 2 fixing plates and Antiluce fasteners
for ease of use
• 4 drainage holes along bottom edge to eliminate water build up
• Pouch designed to take netting of up to 65 linear metres
Pitch Divider Netting - 2.8m high
• 2.0mm thick black polypropylene netting with selvedged edges
• 50mm square mesh, UV resistant
• 2.7m high
• Sold per metre length
• When ordering netting, allow 2.5% extra on overall length of netting
Pitch Divider Netting - 3.0m high
• 2.0mm thick black polypropylene netting with selvedged edges
• 50mm square mesh, UV resistant
• 3.0m high
• Sold per metre length
• When ordering netting, allow 2.5% extra on overall length of netting
Pitch Divider Netting - 3.6m high
• 2.0mm thick black polypropylene netting with selvedged edges
• 50mm square mesh, UV resistant
• 3.6m high
• Sold per metre length
• When ordering netting, allow 2.5% extra on overall length of netting
Pitch Divider Wire
• 4mm thick
• Sold per metre length
50mm Stainless Steel Split Rings
• Supplied individually
Dog Clips
• Supplied individually
Black Bottom Band fitted with 18mm Black Rope
Designed to be stitched to the bottom of netting to help prevent billowing in windy
conditions.
• Brass eyelets at both ends
• Sold per metre length
• Please order netting separately
6mm Polyethylene Rope
• Sold per metre length
