Economy Winch Pitch Divider System
Economy Winch Pitch Divider System
Pitch divider systems allow the playing surface to be divided up into sections.
Designed to be installed outside of the perimeter fence and can hang netting with minimal sag over a span of up to 63m.
• 100mm square posts manufactured from 4mm thick galvanised steel
• Polyester powder coated green
• Winch post is fitted with an economy winch and top pulley wheel
• Dummy post complete with pulley wheel and cleat
• Winch has exposed mechanism and a maximum load rating of up to 350kg (please
note load rating is not restricted and can be over tightened)
• Available in three out of ground heights - 2.7m, 3.0m or 3.6m
Pitch divider systems must be installed in minimum 1m cube of concrete, consult a structural engineer for advice where required. The posts are designed to be concreted directly in the ground but ground sockets can be supplied separately at an additional cost.
2.7m Economy Winch System
• 2.7m out of ground post height
3.0m Economy Winch System
• 3.0m out of ground post height
3.6m Economy Winch System
• 3.6m out of ground post height
Spare Pitch Divider Socket
• 920mm deep socket with a 103mm square internal face
• Supplied individually
Net Storage Pouch
PVC storage pouch designed to fix to weld-mesh fences. The pouch allows for easy storage of the divider netting protecting it against unnecessary wear and tear when not in use.
• Black PVC pouch complete with 2 fixing plates and Antiluce fasteners for ease of
use
• 4 drainage holes along bottom edge to eliminate water build up
• Pouch designed to take netting of up to 65 linear metres
Pitch Divider Netting - 2.7m high
• 2.0mm thick black polypropylene netting with selvedged edges
• 50mm square mesh, UV resistant
• 2.7m high
• Sold per metre length
• When ordering netting, allow 2.5% extra on overall length of netting
Pitch Divider Netting - 3.0m high
• 2.0mm thick black polypropylene netting with selvedged edges
• 50mm square mesh, UV resistant
• 3.0m high
• Sold per metre length
• When ordering netting, allow 2.5% extra on overall length of netting
Pitch Divider Wire - 3.6m high
• 2.0mm thick black polypropylene netting with selvedged edges
• 50mm square mesh, UV resistant
• 3.6m high
• Sold per metre length
• When ordering netting, allow 2.5% extra on overall length of netting
Pitch Divider Wire
• 4mm thick
• Sold per metre length
50mm Stainless Steel Split Rings
• Supplied individually
Dog Clips
• Supplied individually
Black Bottom Band fitted with 18mm Black Rope
Designed to be stitched to the bottom of netting to help prevent billowing in windy
conditions.
• Brass eyelets at both ends
• Sold per metre length
• Please order netting separately
6mm Polyethylene Rope
• Sold per metre length
